|
|
Universal Measurement Interface for Digital Audio Signal
Gál, Marek
This article deals with a modification of existing project which is used as a helpful tool for tracking and measuring digital audio interface I2S. Modifications are based on practical one year experience when the device was tested and deals with new requirements for extension.
|
|
|
Universal measurement interface for digital audio signal
Gál, Marek ; Macho, Tomáš (referee) ; Petyovský, Petr (advisor)
This master’s thesis deals with a modification of existing project which is used as a helpful tool for tracking and measuring digital audio interface I2S. The original design was created by Ing. Martin Stejskal, Polymorphic USB – I2S Interface. Modifications are based on practical one year experience when the device was tested and deals with new requirements for extension. This work describes and justify individual changes of hardware and software part of project.
|
|
|
Measurement of optical and opto-electrical components parameters
Horňáková, Veronika ; Dejdar, Petr (referee) ; Münster, Petr (advisor)
This diploma thesis deals with optical and optoelectronic components. The first part describes three selected optical and three optoelectronic components. Optical components include power divider, isolator and circulator. The optoelectronic ones are laser diode, photodetector and modulator. Basic measurement parameters were defined for each component. In the experimental part, four components from different manufacturers were measured. Selected components are power dividers, isolators, circulators and a laser diode. Subsequently, the measured parameters were compared with the catalog values.
|
|
|
Containerized Low-Voltage/ Middle-Voltage Substations
Marcol, Michal ; Loutocký, Evžen (referee) ; Drápela, Jiří (advisor)
As it is already apparent from a title of my work, I will be engaged in proposal of container VN/NN distributor using components from company ABB. This work will be after final making also used by company ABB to simplify procedure of proposal of any kind of container distributor. In my labor I will be generally deal with individual products, which will after that be used in distributor. Next I will be engaged in particular making of distributor, which should be made. The distributor will be designed for a separate part of the transformer and for a transformer as a unit, which is not separated from substation.
|
|
|
Ventilation of a cytostatic laboratory
Kicko, Peter ; Štětina, Josef (referee) ; Charvát, Pavel (advisor)
The main goal of this thesis is an introducing and guiding the reader with all important aspects of a proposal of ventilation system for cytostatics laboratory, from theoretical knowledge about the issue via familiarization with an appropriate legislative statute, a demonstration of relevant calculations needed for the project, a proposal in the form of technical reports as well. In this thesis the process of validation, which is needed for installed technology in the cleanroom, is also described. The thesis is supported by drawing documentation of real ventilation project for cytostatics laboratory, which follows the aforementioned technical report and calculations.
|
|
|
Measurement of basic parameters of optical and optoelectronic components
Beneš, Pavel ; Látal, Michal (referee) ; Münster, Petr (advisor)
This diploma thesis deals with optical and optoelecronic components. The first part of the work describes the optical paths and methods of their measurement. The second part describes the coupler, circulator and isolator. Further described is a laser diode, a photodetector and a modulator. The third part describes the measurement procedure of the coupler, circulator, isolator, laser diode, photodetector and modulator. The measured values are compared with the catalog values.
|
|
|
Crash test and its effect on cooling module design
Hačunda, Patrik ; Lapčík, Josef (referee) ; Bazala, Jiří (advisor)
Bakalářská práce se zabývá rešerší na téma „Crash test a jeho vliv na konstrukci chladícího modulu“. Práce obsahuje základní data Evropské legislativy, informace o společnostech provádějící nárazové testy, popis a funkce jednotlivých částí chladícího modulu a v neposlední řadě popis prvků kompenzující náraz v nízké rychlosti. Na základě předpisu společnosti RCAR je zpracována simulace čelního strukturálního nárazového testu.
|
|
|
Measurement of basic parameters of optical and optoelectronic components
Beneš, Pavel ; Látal, Michal (referee) ; Münster, Petr (advisor)
This diploma thesis deals with optical and optoelecronic components. The first part of the work describes the optical paths and methods of their measurement. The second part describes the coupler, circulator and isolator. Further described is a laser diode, a photodetector and a modulator. The third part describes the measurement procedure of the coupler, circulator, isolator, laser diode, photodetector and modulator. The measured values are compared with the catalog values.
|
|
|
Measurement of optical and opto-electrical components parameters
Horňáková, Veronika ; Dejdar, Petr (referee) ; Münster, Petr (advisor)
This diploma thesis deals with optical and optoelectronic components. The first part describes three selected optical and three optoelectronic components. Optical components include power divider, isolator and circulator. The optoelectronic ones are laser diode, photodetector and modulator. Basic measurement parameters were defined for each component. In the experimental part, four components from different manufacturers were measured. Selected components are power dividers, isolators, circulators and a laser diode. Subsequently, the measured parameters were compared with the catalog values.
|
|
|
Universal Measurement Interface for Digital Audio Signal
Gál, Marek
This article deals with a modification of existing project which is used as a helpful tool for tracking and measuring digital audio interface I2S. Modifications are based on practical one year experience when the device was tested and deals with new requirements for extension.
|
guest ::
